Steel Roof/Wall Sheet Roll Forming Machine PAGE D'ACCUEIL > Steel Roof/Wall Sheet Roll Forming Machine
Documentation Forming soil 686 Sheet
  • Documentation Forming soil 686 Sheet

Documentation Forming soil 686 Sheet

Documentation Forming soil 686 Sheet
ENQUETE
686 Sheet Roll Forming Machine
 

1. Profile
 
1.1 Coil materialcolor Sheet,  galvanized sheet
1.2 Coil material thickness0.25-0.50m
1.3 Feeding coil material wide:914mm
2. Process       flow  
Decoiling--feeding---forming---cutting---production
3.Electric       decoiler 3.1 Inside diameter coil is 450 - 550mm        
3.2 Coil Width is 914 mm                     
3.3 Coil load 5 ton                      
4 Forming device 4.1 Shaft material: 45# steel , outer diameter:70mm
4.2 Roller material: #45 steel with quenching        
4.3 Pairs of forming rollers :18 sets      
4.4 Chains transport             
4.5 Forming speed10-15 m/min         
4.6 Main motor power:4 kw                
4.7 Voltage:380v,50Hz,3Phase              
5.  Hydraulic Cutting device 5.1Double Guide Pillar Type Cutting System
5.2Hydraulic Station1set               
5.3 With hydraulic station, motor 4 KW      
5.4 Cutting press 20 ton              
5.5 Hydraulic cutter             
5.6 Blade and mold material: G12 steel with quenched treated 60-62℃
5.7Cutting system: advanced hydraulic drive, automatic cutting after
   forming, no distorting or wasting, high level safety factor.
6.Controlling
Device
6.1 Screen:text screen        
6.2 PLC: Delta                         
6.3 Automatic length measurement            
6.4 Automatic quantity measurement               
6.5 Computer is used to control length and quantity.
   Machine will automatically cut to length and stop
   when required quantity is achieved
6.6 Length inaccuracy can be amended easily   
7. Simple output frame 1 set
   
   
   

 
Commentaires

+86-15127765088